DIY Ricepotter Party Favours
To celebrate the first Harry Potter book ever published, we have created this fun Ricepotter printable DIY for you to make some fun party favours
Download the templates below and follow the easy instructions to make you own Ricepotter party favours.
template here!
Step 1: Download the PDF at the top of this post and print out. You will need your printed template on thick white paper, a pencil, some string, a thick needle (or hole puncher), a pair of scissors and some string.
Step 2: Cut out your template using scissors or a kraft knife and a ruler.
Step 3: Fill in the dotted lines with your name or the name of your friends the party favour is for!
Step 4: Using a thick needle or a hole puncher, make some holes on the top of your template where indicated with a white dot.
Step 5: Fold your template along the dotted lines to crease the paper in the right places.
Step 6: Apply glue to the white tab on the side of the template.
Step 7: Glue the tab to the other side to form your box.
Step 8: Now you can fold the bottom in to close your box, look at the image above to see how to close it.
Step 9: To finish closing the box slot the smallest tab under the first one.
Step 10: Cut a piece of string (about 15cm).
Step 11: Slide it into the holes at the top of your box in the same fashion as on the image above.
Step 12: Fill your box up with party goodies for you and your friends and close it up by pulling on the string gently!
You do not need to be limited to these four designs, use the print-outs as a template and trace onto any specialty patterned paper that you like!
We hope that you enjoy this Ricepotter paper party favour. Let us know if you come up with any other great ideas for how to use them or any other cool monster designs!
Step 1: Download the PDF at the top of this post and print out. You will need your printed template on thick white paper, a pencil, some string, a thick needle (or hole puncher), a pair of scissors and some string.
Step 2: Cut out your template using scissors or a kraft knife and a ruler.
Step 3: Fill in the dotted lines with your name or the name of your friends the party favour is for!
Step 4: Using a thick needle or a hole puncher, make some holes on the top of your template where indicated with a white dot.
Step 5: Fold your template along the dotted lines to crease the paper in the right places.
Step 6: Apply glue to the white tab on the side of the template.
Step 7: Glue the tab to the other side to form your box.
Step 8: Now you can fold the bottom in to close your box, look at the image above to see how to close it.
Step 9: To finish closing the box slot the smallest tab under the first one.
Step 10: Cut a piece of string (about 15cm).
Step 11: Slide it into the holes at the top of your box in the same fashion as on the image above.
Step 12: Fill your box up with party goodies for you and your friends and close it up by pulling on the string gently!
You do not need to be limited to these four designs, use the print-outs as a template and trace onto any specialty patterned paper that you like!
We hope that you enjoy this Ricepotter paper party favour. Let us know if you come up with any other great ideas for how to use them or any other cool monster designs!