DIY Ricemonster Paper Fans
Summer is finally here, but boy it's hot! To help you cool down in this summer weather we have created a set of four Ricemonster paper fans!
Download the templates below and follow the easy instructions to make your own set of Ricemonster paper fans. Download the PDF template here! 
Step Step 1: Download the PDF at the top of this post and print out. You will need your printed template(s) on thick white paper, a hole puncher, a pair of scissors and some paper fasteners.
Step 2: First, start by cutting out all the fan segments from each template, each fan has two pages.
Step 3: Once all of the parts of your fan are cut, punch a hole in the same place at the bottom of each fan segment. If your paper/card is not too thick, the easiest way to do this is to pile all the segments on top of one another and punch them all in one go. 
Step 4: When all of the strips are hole punched, place the paper fastener in all the fan segments. Make sure that you have placed them in the same order as on the template otherwise the face will the in the wrong place!
Step 5: Flatten your paper fastener on the other side of your fan segments. Repeat these steps for each fan.
Step 6: Now you can open and close your fan, make sure to take it with you on a hot day!
You do not need to be limited to these four designs, use the print-outs as a template and trace onto any specialty patterned paper that you like!
We hope that you enjoy these Ricemonster paper fans. Let us know if you come up with any other great ideas for how to use them or share with us other cool monster designs! Enjoy this sweet summer!
Step Step 1: Download the PDF at the top of this post and print out. You will need your printed template(s) on thick white paper, a hole puncher, a pair of scissors and some paper fasteners.
Step 2: First, start by cutting out all the fan segments from each template, each fan has two pages.
Step 3: Once all of the parts of your fan are cut, punch a hole in the same place at the bottom of each fan segment. If your paper/card is not too thick, the easiest way to do this is to pile all the segments on top of one another and punch them all in one go. Step 4: When all of the strips are hole punched, place the paper fastener in all the fan segments. Make sure that you have placed them in the same order as on the template otherwise the face will the in the wrong place!
Step 5: Flatten your paper fastener on the other side of your fan segments. Repeat these steps for each fan.
Step 6: Now you can open and close your fan, make sure to take it with you on a hot day!
You do not need to be limited to these four designs, use the print-outs as a template and trace onto any specialty patterned paper that you like!
We hope that you enjoy these Ricemonster paper fans. Let us know if you come up with any other great ideas for how to use them or share with us other cool monster designs! Enjoy this sweet summer!